communications components key features ? case grounded hermetic five-pin to-46 coaxial package ? separate apd and tia bias inputs, allowing optimization of operating points and noise immunity ? -40 to +85c operating temperature range with -34 dbm typical sensitivity the jdsu rxa m dpgx 088 xx-000 series fiber pigtail receivers incorporate a 60-front-illuminated avalanche photodiode (apd) packaged with a transimpedance amplifier (tia) and a single-mode fiber pigtail, designed to operate up to 2.5 gbps. the rxa m dpgx 088 xx-000 series receivers are assembled in a rugged coaxial fiber pigtail package with a choice of connector type. standard choices for connector type lc and fc/sc with spc/apc end faces are available. applications ? passive optical networks and fttx applications - ge-pon - gpon ? access and metro networks - sonet oc-48 lr-2 receivers compliance ? telcordia qualified, fro nt-illuminated inp based apd 2.5 gbps apd/tia fiber pigtail receiver north america : 800 498-jdsu (5378) website : www.jdsu.com worldwide : +800 5378-jdsu
dimensions diagram 2 2.5 gbps apd/tia fiber pigtail receiver (specifications in mm unless otherwise noted. ) standard, sc/apc connector without bracket, sc/apc connector electrical schematics pinout pin symbol description 1 vr apd bias 2 out- negative output 3 out+ positive output 4 vcc tia bias 5 gnd case ground note: compared with other pins, pin #1 has been shorted by 2 mm for orientation.
3 2.5 gbps apd/tia fiber pigtail receiver absolute maximum ratings parameter rating storage temperature -40 to +85c operating case temperature (t op ) -40 to +85c apd voltage supply (v cc )v br v apd reverse current 5 ma apd forward current 10 ma esd threshold (hbm) 300 v maximum incident optical power +5 dbm note: all specifications are at t op = 25c unless otherwise stated specifications parameter conditions minimum typical maximum tia supply voltage 3.0 v 3.3 v 3.6 v tia current v cc =3.3 v, t op =-40 to +85c - 48 ma 59 ma modulation bandwidth (-3 db) pin = -30 dbm, ref=200 mhz, 1.8 ghz 2.0 ghz - single-ended, v apd =v br -2 v ac transimpedance pin = -30 dbm, f=1.2 ghz, single-ended 1.15 k 1.80 k 2.35 k output impedance 40 50 60 dark current v apd =v br -2 v - - 20 na sensitivity 2.488 gbps, nrz, prbs=2 23-1 , ber=10 -10 , - -34 dbm -32 dbm t op =-40 to +85c, er >10 db responsivity pin=1 uw, v apd =v br -2 v - 7.7 a/w - overload 2.488 gbps, nrz, prbs=2 23-1 , ber=10 -10 , 0 dbm - - t op =-40 to +85c, er >10 db apd breakdown voltage i r =10 a 40 v 51 v 60 v v br temperature coefficient -40 to +85c 0.1%/c - 0.3%/c optical insertion loss for connector - - 0.5 db optical return loss - - -30 db note: all specifications are at t op = 25c @1550 nm,tia supply voltage=3.3 v, beginning of life, unless otherwise stated electrostatic discharge (esd) esd protection is imperative. use of grounding straps, antistatic mats, and other standard esd protective equipment is required when handling or testing a junction photo diode. fiber pigtail should be handled with less than 10 n pull and with bending radius greater than one inch. soldering temperature of the leads should not exceed 260c for more than 10 seconds.
north america : 800 498-jdsu (5378) website : www.jdsu.com worldwide : +800 5378-jdsu ordering information for more information on this or other products and their availability, please contact your local jdsu account manager or jdsu directly at 1-800-498-jdsu (5378) in north america and +800-5378-jdsu worldwide, or via e-mail at customer.service@jdsu.com. 2.5 gbps apd/tia fiber pigtail receiver sample: rxa m dpg1 088 00-000 code package 00 wi t hou t bra c k et 01 wi t h mb14 bra c k et rxa m dpg product specifications and descriptions in this document subject to change without notice. ? 2009 jds uniphase corporation 301 62696 000 0309 rxamdpgx088.ds.cc.ae march 2009 telcordia is a registered trademark of telcordia technologies incorporated. -000 088 code connector 1f c / spc c o nnet or 2 sc / spc c o nnet or 3l c / spc c o nnet or 4f c /a pc c o nnet or 5 sc /a pc c o nnet or 6l c /a pc c o nnet or
|
